Lowongan Kerja PT Supraco Indonesia

Share
Sponsored Link

lowongan-kerja-pt-supraco-indonesia

Lowongan Kerja PT Supraco Indonesia | PT. SUPRACO INDONESIA is Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects

1. Regulatory & Permit Site Interface (CP-A231)
RESPONSIBILITY AND DUTIES:

  • Onsite representative for all environmental, regulatory and permitting issues
  • Coordinate ongoing efforts to identify and obtain various permits for scope of work in a timely manner to comply with national, provincial and local (Indonesian) rules and regulations
  • Interface with the E&R functional group to support project activities and implement best practices and lessons learned
  • Work and participate with project team and functional group on preparation of project support documents, such as Environmental Management Plan (EMP), Waste Management Plan (WMP), Spill Prevention and Response Plans (SPRP), protection of surface water and other related studies for the project
  • Support in selecting third party consulting services with respect to Oil Spill Response Plan (OSRP) preparation and development in coordination with Functional group and Productions
  • Interface with project engineering and construction resources on project design and implementation details required to satisfy project permit and environmental requirements
  • Develop Environmental Standard – e.g. stream crossing, erosion control, etc
  • Coordinate development and submittal of EMCAPS deliverable for regulatory compliance plan (RCP) and environmental management plan (EMP) for project facilities
  • Supervise, monitor and review the plan of the implementation environmental protection measure according to RKL and RPL (environmental monitoring and management plan) during construction which is performed by third party environmental consultants
  • Interface and coordinate activities with E&R functional group, as appropriate, on preparation of permitting plans and government agencies/inspector interface
  • Review the RKL/RPL report for socioeconomic issue developed by EPC Contractor prior submitting to functional group in Development
  • Review and endorse EPC contractor environmental and regulatory documents and deliverables, as prescribed in project Coordination Procedure
  • Prepare project internal environmental and regulatory stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests
  • Assist project team, as appropriate, on the field inspection, special tasks and studies related to overall SH&E and permitting requirements.
  • Support the E&R functional group on Regframe implementation and implement regular environmental compliance assessments as part of the OIMS requirements for the project.
  • Ensure the implementation of the Upstream EMDC Environmental Standard is adhered to appropriately and align with Corporate Environmental guidance
  • Implement and assist training in environmental standard and technologies to EPC Contractor

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • Broad technical and SH&E skills with basic understanding of project management and SH&E functional work processes
  • 5+ years broad-based experience preferred, in environmental compliance and impact mitigation related to oil and gas industry, processing and transportation, with prior experience in one or more SH&E-related disciplines
  • process, and in particular SH&E and OIMS deliverable requirements
  • Knowledge of EMDC strategies and key business drivers
  • Good interpersonal and communication skills
  • Knowledge of EMCAPS
  • Adaptable to changing priorities
  • Placement : Jakarta Base

2. Civil / Structural Inspector – Infrastructure Facilities (CP-A232)
RESPONSIBILITY AND DUTIES:

  • Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
  • Coordinate with other structural.
  • Review original material certificates for compliance to codes and specifications
  • Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
  • Ensure storage and use of welding consumables is per manufacture’s recommendations and full certification
  • Review Contractor’s field inspection and test reports
  • Verify fabrication fit-up, alignment, and dimensional tolerances
  • Review welder qualifications certifications, and attend welder qualification
  • Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
  • Implement project Construction Surveillance Program

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Working Knowledge of:

  • Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
  • Piping fabrication methods
  • Welding processes and NDE techniques including evaluation methods
  • Piping, Isometrics and shop Drawings
  • Trained to authorize work permits (e.g. hot work, confined space, etc.)
  • Good oral and written English language skills
  • Well versed in safe work practices
  • Demonstrated ability to communicate in multiple languages
  • Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
  • Skills and experience in the development of commissioning and start-up budget,.
  • Skills and experience in the development of manpower and vendor support mobilization/demobilization plan and schedules, and the development of lists of required commissioning and start-up spares, consumables, first-fills, special tools, temporary equipment, etc.

Qualifications:

  • Bachelor degree in a related field is preferable and is a plus
  • Certificates in planning and budgeting from recognized institutions are preferable
  • Advance skill in project planning with Primavera and MS Project is a must
  • Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
  • Advance skills in project estimating and budgeting is a must
  • Placement : Cepu Site

3. E&I Construction Tech Foreman – Field Facilities (CP-A233)
RESPONSIBILITY AND DUTIES:

  • monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
  • Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
  • Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
  • Support Construction Site Manager in monitoring and appraising the contractor’s performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
  • Verify physical progress
  • Monitor mechanical acceptance and start-up activities between operating unit and contractor
  • Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
  • Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
  • Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
  • Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
  • Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
  • Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
  • Witness installation of E&I control panels (both local and inside the control rooms)
  • Monitor and witness continuity and meggering inspection works for cables
  • Monitor cable laying works in trenches, through ducts and on cable trays
  • Monitor loop checks and review records for the same in accordance with technical requirements
  • Monitor construction and installation and testing of instrument tubing works
  • Review Contractor’s field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
  • Assist and co-ordinate with other disciplines on electrical motors installation and alignments
  • Interface, participate or co-ordinate in E&I pre-commissioning activities as required
  • Preparation of punch lists
  • Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • Minimum ten (10) year’s experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
  • Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
  • Exposure to DCS instrumentation works and commissioning of the same
  • Thorough knowledge on International standards on E&I like IEC etc.
  • Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
  • Well versed in safe work practices
  • Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
  • Placement : Cepu Site

 

4. Rotating Inspector (CP-A234)

  • Minimum S1 Engineering with around 3 years experince
  • Experience with Rotating Inspection in Oil & Gas
  • MIGAS Rotating certification is a MUST
  • Fluent in English, written & spoken
  • Wiliing to be place anywhere around Indonesia
  • Permanent status is possible

 

5. Environment, Regulatory & Socioeconomic Interface (CP-A235)
RESPONSIBILITY AND DUTIES:

  • Coordinate ongoing effort to obtain various permits for EPC’s scope of work in a timely fashion in order to remain in compliance with National, Province, and Local regulations.
  • Interface with the functional groups as necessary to access timely support for project activities, identify/implement best practices and lessons learned
  • Work with PMT and Functional groups to support development of documents such as oil spill response plan and waste management plan.
  • Interface with project engineering and construction to ensure environmental and regulatory compliance.
  • Coordinate development and submittal of EMCAPS regulatory compliance and environmental management plans for project facilities
  • Work with consultants, as necessary, to prepare and submit requisite environmental, regulatory and socioeconomic impact assessments.
  • Interface and coordinate activities with functional groups, as appropriate, to develop and implement appropriate plans for interfacing with Non-Governmental Organisations (NGO’s) and Government agencies.
  • Review and advise PMT about EPC contractor’s environmental, regulatory and socioeconomic documents and deliverables, as prescribed in project Coordination Procedure.
  • Prepare project internal environmental, regulatory and socioeconomic stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests.
  • Assist project team, as appropriate, on special tasks and studies related to overall Environmental and Regulatory permitting requirements, and community affairs at shore tie-in and offshore work sites.
  • Develop amicable relationships to facilitate open communication and transparency in processes and procedures with various Government offices (BPMIGAS, Sea Com, etc) that are responsible for issuing recommendations and approvals for regulatory and environmental permits.
  • Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
  • 5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
  • Experience interfacing with NGO and other similar organisation
  • Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
  • Knowledge of EMDC strategies and key business drivers
  • Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
  • Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
  • Willingness to undertake business travel and/or field based short term assignments
  • Ability to interact proactively in the Project’s interest, with EPC contractor, local Government offices and local community in East Jawa province.
  • Placement : Jakarta Base

 

6. Lab Inspector Soil Mechanics- Geotechnical (CP-A236)
RESPONSIBILITY AND DUTIES:

  • Site supervision of fieldworks relating to soil mechanic and geotechnical as the result of earth works contracts ensuring compliance with specification and common practice.
  • Inspect the stock pile and sampling material whether from borrow site or working area.
  • Evaluating the result of lab test of sampling material and to be recommended countermeasures for low strength soils in conctact with structural foundations:
    • Proctor or CBR test
    • Permiability test,
    • Atterberg test,
    • Grain size distribution analysis
    • etc
  • Verify proper dam foundation slope stabilization and structures, including soil blending-mix of native and borrow materials.
  • Supervision of earthworks placement and field testing.
  • Verification dam construction procedures are followed

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • Working Knowledge of:
    • Soil Mechanics field tesing methods, including determining Vane Shear Strengths in cohesive soils using ASTM D 2573 method and Cone Penetration Test per ASTM D3441.
    • Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold).
  • Degree in Strata 1 for Civil/Geotechnical/Geological Engineering 7 years, or Strata 2 Master of Science degree 5 years of relevant experience (earth and embankment work preferred).
  • Well versed in safe work practices.
  • Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
  • Good oral and written English language skills
  • Placement: Cepu Site

 

7. SHE&S Safety Site (CP-A237)
RESPONSIBILITY AND DUTIES:

  • Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
  • Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
  • Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
  • Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
  • Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
  • Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
  • Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
  • Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
  • Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
  • Prepare / provide a safety induction briefing to new team members and visitors to site
  • Collect and share safety lessons learned with other sites and project and functional management

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • College level education or equivalent
  • 10+ years in Construction Safety-related positions, around 6 years in Onshore
  • Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
  • Placement : Cepu Site

 

8. Rig Inspector (CP-A238)

  • Minimum S1 Engineering with around 3 years experience
  • Experience with Rig Inspection in Oil & Gas
  • MIGAS Rig certification is a MUST
  • Fluent in English, written & spoken
  • Willing to be place anywhere around Indonesia
  • Permanent status is possible

 

9. FIELD EXTERNAL RELATION OFFICER (CP-A239)

RESPONSIBILITY AND DUTIES:

  • Conduct intensive engagement efforts with local stakeholders in village and sub district.
  • Supporting Deputy Manager offshore Community Engagement, technically resolve issues related to external stakeholders; disputer, protest, socialization, etc.
  • Implement CSR programs based on social impact of Company operations (Social Management Plan), Sustainable Development position and Company Core Values, to achieve sustainable community support to Company Operations.
  • Generate support and respect from the Community at large.
  • Engage proactively with stakeholders to anticipate dynamic and environmental change.
  • Be responsible of promoting the company image as a good citizenship company toward its external publics by conveying the company social responsibility to the surroundings in order to obtain a harmonious environment

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

  • Excellent communication and interpersonal skills.
  • Has the ability and knowledge to identify and provide analysis on local community needs.
  • Strong commitment to company core values, business ethics and business goals.
  • Excellent health and able to travel within all company offshore working area.
  • Excellent communication and inter personnel skills to effectively interface with field production operation personnel, multidiscipline department and other supporting department.
  • 5 + years broad experience in doing stakeholder relation especially local community.
  • Has commitment to company core values, business ethics and business goals.
  • A very good team player.
  • Placement : Jakarta Base

10. Pipeline Inspector (CP-A240)

  • Minimum S1 Engineering with around 3 years experience
  • Experience with Onshore Pipeline Inspection in Oil & Gas
  • Familiar with Design Drawing
  • MIGAS pipeline certification is a MUST
  • Fluent in English, written & spoken
  • Willing to be place anywhere around Indonesia
  • Permanent status is possible

Please send your application with detailed resume and recent photograph to

Email : recruitment@supraco.com

(Indicate job title name and code on subject emai)

Lowongan Kerja PT Supraco Indonesia | Closing date : Thursday, August 08, 2013

Hot News ! : Pemerintah Indonesia akan melakukan penerimaan CPNS 2014 sebanyak 100.000 orang dari pelamar umum. Jauh lebih banyak daripada tahun 2013 kemarin.

Bagi calon pelamar CPNS 2014 diharapkan melakukan persiapan yang matang untuk menghadapi ujian CPNS 2014 nanti. Karena seperti tahun 2013 yang lalu yang terbukti sukses, penerimaan CPNS 2014 akan dilakukan dengan murni dan trasparan dimana sepenuhnya ditangani pemerintah pusat bekerjasama dengan konsorsium perguruan tinggi.

Jadi jika ingin lulus CPNS satu-satunya cara adalah dengan belajar dan melakukan persiapan yang matang.

Apa sebaiknya persiapan yang dilakukan?

Untuk memudahkan anda mempelajari Soal-Soal CPNS dengan metode yang tepat, Anda bisa menggunakan Paket Latihan Soal CPNS 2014:

  1. Isi produk: Software + Materi Presentasi + ebook
  2. Kumpulan Soal CPNS beserta Jawabannya
  3. Prediksi Soal CPNS yang sering muncul
  4. Praktek Nyata Simulasi Ujian CPNS (Tes Sistem CAT)
  5. Dapat digunakan tanpa internet / offline
  6. Dapat digunakan pada Laptop, iPad dan Android
  7. Berlaku seumur hidup dan gratis update selamanya dan ditambah Ratusan Bonus Gratis materi pendukung belajar Soal CPNS.

Untuk mendapatkan Software ini Selengkapnya : Baca Disini >>>

Share
Sponsored Links

Post Related to Lowongan Kerja PT Supraco Indonesia

Lowongan Kerja BUMN Migas PT.Pertamina Patra Niaga 2014

Lowongan Kerja BUMN Migas PT.Pertamina Patra Niaga 2014

Sponsored Link Lowongan Kerja Migas September 2014 :Awalnya di tahun 1997, Perseroan didirikan dan

Lowongan Kerja BUMN Migas Terbaru PT Pertamina (Persero)

Lowongan Kerja BUMN Migas Terbaru PT Pertamina (Persero)

Sponsored Link Lowongan Kerja BUMN MIgas Agustus 2014 : PT Pertamina (Persero) telah Lebih

Lowongan Kerja BUMN Migas Tingkat S!-S2 PT Pertamina (Persero)

Lowongan Kerja BUMN Migas Tingkat S!-S2 PT Pertamina (Persero)

Sponsored Link Oil Gas Career in Oil / Gas / Petroleum Company owner Government